DOOR: Double door. Both doors are automatic vertical sliding or manual flap/fall back which should serve as a loading platform, with safety device and made up of tempered (toughened) glass and High Shock Tested (HST).

CONTROL SYSTEM: Security Password protection. Standard washing cycle programmed at least 12 or more should be available in the control system. The LCD Control screen display in detail the washing cycle phase and parameters Data interface RS232 + RS485 should be available.

OTHER FEATURES: System equipped with process tank. Higher capacity quick opening valves can be used for the shortest possible filling and draining phases so that short total process time is achieved. The design is focus on saving the environment through reduced consumptions of all utilities. Cleansable spray arms located at the top and bottom of the chamber. Wash carts equipped with Cleansable spray arms between each shelf so as to facilitate water to reach all the surfaces which needs to be cleaned. Circulating water pressure monitoring system available with the unit all electrical components are easily accessible preferably via a sliding cabinet for easy service- ergonomic design. Washer built in self-cleaning debris filter. Upon completion of the wash phase, debris should be -flushed into the effluent drai Noise level not exceed < 60 dB(A).

PROCESS PHASE: The washer should perform pre-rinsing, cleaning, post-rinsing, thermal disinfection, final rinsing and drying phases. Validated programs are secured by access code. Detergents and rinse agents should be automatically dispensed during the cycle. Thermo disinfection achieved by a temperature of at least 90 °C and the disinfection will be 

Auto controlled. Temperature control by means of 2PT100 or 2PT1000 independent probes. Steam condenser, with condensate draining directly into the drain

ALARM: Washer equipped with audible/ visual alarm that alerts if error code occurs. Control of Chemical product quantity, with minimum level alarm

DOSING PUMPS: Equipped with minimum 3 dosing pump of chemical products under a complete microprocessor control, with the option of modifying the required detergent quantities in each cycle.

CYCLE TIME: The process time not exceed more than 45 min.

DRYING: The washer has fast and efficient energy saving drying mechanism with heat exchanger, fan, condenser and H14 HEPA-filter.

ESSENTIAL ACCESSORIES: 4 - Level wash cart Anesthesia basket (wash cart) MIS instrument (wash cart) The Washer Disinfector should be supplied with loading and unloading trolleys and carts. Consumable required for initial start up should be supplied as standard.

UTILITY: Plumbing connections (size and type): cold, warm (temp), de-mineralized, standard with water quality, drainage etc. Electrical power

Technical Specifications